Inventory Unit Detail

2020 Land Pride RCR1860

Call for Price

Call for Price

Key Features

New/Used New
Availability In Stock
LocationArt's Lawn Mower Shop
Condition Excellent

Product Features

Description

The RCR1860 Rotary Cutters are ideal for light-duty maintenance around the farm, on gently slopes, or slightly contoured right-of-ways. A fully welded deck adds additional strength while the floating 3-point permits the deck to hug the terrain for a quality cut. The cutters have a category I three-point hitch and are Quick Hitch adaptable. They are offered with a standard ASAE Category 3 driveline with either shear bolt or slip-clutch protection and either a laminated or solid rubber tailwheel.

Features & Benefits
  • Surpassed Rugged Industry Standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year Gearbox Warranty: Shows our confidence in the gearbox integrity.
  • Cat. 3 Driveline With Shearbolt: Shearbolt offers maximum driveline protection.
  • Cat. 3 Driveline With 2-plate Slip-clutch: Slip-clutch driveline offers convenience for continual work.
  • Dual Position Clevis Type 3-point Floating Top Link: Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
  • Lower Clevis Type 3-point Hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Heavy 10 Gauge Deck Construction: Can withstand more abuse than lighter gauge decks.
  • Box Tubing Deck Supports: Makes for a stronger rigid deck.
  • Fully Welded Deck: Robotic welded. Adds additional strength.
  • Extended Cutter Front: For increased material flow and added protection.
  • Round Back Design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 7 1/4" Deck Height: Allows cutter to handle heavy cutting conditions.
  • 1 1/2" To 13" Cutting height Provides for a wide range of cutting conditions.
  • Full Length Skid Shoes: Provides sidewall reinforcement and full protection to bottom of sidewall.
  • 1/2" X 3" Heat-treated Free Swinging Blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined Blade Bar Hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 10 Gauge Stump Jumper: Standard round stump jumper slides over stumps, rocks, and debris.
  • High Blade Tip Speed, Rcr1860 = 16,360 Fpm: Ensures clean cut.
  • High Blade Tip Speed, Rcr1872 = 14,853 Fpm: Ensures clean cut.
  • 15" laminated Tailwheel: Laminated material is long lasting in rough conditions.
  • 4" X 16" Solid Rubber Tailwheel: Can’t go flat.
  • Heavy-duty Spindle On Tailwheel: Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel assembly.
  • Guarding Protect Against Flying Debris: Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard.
  • Driveline Holder: Keeps driveline up out of dirt. Easier hook up of driveline.
Specifications & Capacities
  • Implement Weight, (with laminated tailwheel, slip clutch driveline, front rubber guards and rear metal band): 599 lbs.
  • Hitch Category: l with floating clevis top link, Quick-Hitch ready
  • Cutting Width: 60"
  • Overall Width: 65"
  • Overall Length: 99 3/8"
  • Deck Height (bottom Of Deck To Bottom Of Skid Shoe): 7 1/2"
  • Cutting Height: 1 1/2" - 13"
  • Cutting Capacity: 2" Diameter
  • Recommended Tractor Horsepower: 20-65 horsepower
  • Power Take-off Speed: 540 rpm
  • Gearbox: 1:1.93 Speed-up beveled gears, Cast iron housing
  • Gearbox Oil Capacity & Lubricant: 4.5 Pints of EP 80-90W oil
  • Deck Material Thickness: 10 Ga. (.134")
  • Side Skirt Material Thickness: 10 Ga. (.134")
  • Deck Construction: All welded deck
  • Skid Construction: Full length welded on
  • Stump Jumper: Round pan 10 ga. x 24" with blade holder bar
  • Blades (2): 1/2" x 3" Heat treated alloy steel, Free-swinging high lift - low friction
  • Blade Bolts: Keyed with harden flat washers & lock nuts.
  • Blade Tip Speed: 16,363 FPM
  • Driveline: ASAE Category 3 shearbolt or 2-plate slip-clutch
  • Driveline Protection (Optional): Center shearbolt protection
  • Driveline Protection (Optional): Center bolt 2 plate slip clutch
  • Tailwheel Mount Assembly: Welded A-arm and caster fork with 360 degree swivel
  • Tailwheel: 4" x 8" x 15" Laminated tire with cast iron hub or 4" x 16" molded rubber tire
  • Front Guard (optional): Rubber Belting; Accessory: Chain Guard
  • Rear Guard Standard: Metal Band; Optional: Rubber Belting; Accessory: Chain Guard
NOTES:
Some feature photos may be represented by a similar model and not the specific model shown.

General

Working Width 60 in.
Width 65 in.
Length 99 3/8 in.
Weight 599 lb.
Recommended HP 20-65 HP

Shopping Tools